Engineered for demanding pulling and lifting applications, this 304 stainless steel stock sheet offers superior corrosion resistance and exceptional strength for custom fabrication and structural support.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.064" |
| Length | 23" |
| Width | 21" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.064 inches in thickness, 23 inches in length, and 21 inches in width. Composed of Austenitic stainless steel, it exhibits excellent formability, weldability, and resistance to a wide range of corrosive media, making it suitable for marine, chemical processing, and food service environments. Its robust construction ensures reliable performance under tensile stress and dynamic loads, facilitating the creation of custom lifting points, protective guards, and structural components where hygiene and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sheet surface thoroughly to remove any contaminants. 2. Measure and mark the desired cut lines according to project specifications. 3. Utilize appropriate cutting tools (e.g., shear, laser cutter) to achieve precise dimensions. 4. Deburr all cut edges to ensure a smooth finish and prevent injury.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for stainless steel, leading to poor cut quality and tool damage. | Employ high-speed steel or carbide-tipped cutting tools specifically designed for working with stainless steel. |
| Failing to account for material spring-back during bending or forming operations. | Perform bend radius calculations that incorporate the spring-back characteristics of 0.064" 304 stainless steel to achieve the intended angles. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom pulling and lifting apparatus fabrication, Marine hardware and structural components, Food processing equipment and sanitary surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||