Engineered for demanding environments, this 304 stainless steel stock sheet offers exceptional strength and corrosion resistance for vital pulling and lifting applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.045" |
| Length | 40" |
| Width | 32" |
A high-performance industrial component, this 0.045" thick stock sheet measures 40" in length and 32" in width. Fabricated from premium 304 stainless steel, it delivers superior tensile strength, excellent formability, and outstanding resistance to corrosion and oxidation, even in harsh chemical or marine settings. Its precise dimensions ensure seamless integration into complex assemblies and provide a reliable foundation for custom fabrication in critical lifting and pulling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove any debris or contaminants. 2. Position the stock sheet according to design specifications, ensuring proper alignment. 3. Secure the sheet using appropriate fastening methods (e.g., welding, bolting) as dictated by the application's load requirements and structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive environments. | Always specify 304 stainless steel for applications exposed to moisture, chemicals, or saltwater to prevent premature rust and failure. |
| Underestimating load-bearing requirements for lifting components. | Consult engineering drawings and perform load calculations to ensure the stock sheet's thickness and material properties are adequate for the intended pulling or lifting forces. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabricated lifting lugs and eye plates, Reinforcement plates for pulley systems, Components for marine-grade pulling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||