High-quality 304 stainless steel stock sheet, precisely manufactured to 0.044" thickness, 27" width, and 42" length. Ideal for custom hydraulic component fabrication requiring superior corrosion resistance and mechanical integrity.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.044" |
| Length | 27" |
| Width | 42" |
A proven choice for industrial professionals, this 304 stainless steel stock sheet offers exceptional performance in hydraulic applications. Measuring 0.044 inches (1.12mm) in thickness, 27 inches (686mm) in width, and 42 inches (1067mm) in length, it meets stringent industry standards for material composition and dimensional accuracy. The inherent properties of 304 stainless steel, including its excellent corrosion resistance to a wide range of media and good formability, make it suitable for fabricating critical hydraulic manifolds, pump components, and valve bodies where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Carefully cut the sheet to the required component dimensions using appropriate cutting tools for stainless steel. 3. Deburr all edges thoroughly to prevent contamination and ensure a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for hydraulic components in corrosive environments. | Always specify and use materials like 304 stainless steel for hydraulic systems exposed to moisture, chemicals, or saltwater to prevent premature degradation and failure. |
| Improper cutting techniques leading to burrs or material distortion. | Employ sharp, appropriate cutting tools (e.g., waterjet, laser, or specialized shear blades) and follow best practices for cutting stainless steel to minimize heat input and produce clean edges. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Hydraulic Manifold Fabrication, Hydraulic Pump and Valve Components, Hydraulic System Reservoirs and Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||