Engineered for robustness, this 304 stainless steel stock sheet offers superior strength and corrosion resistance. Its substantial dimensions make it ideal for fabricating critical components in pulling and lifting systems where reliability is paramount.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.155" |
| Length | 32" |
| Width | 44" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet measures 0.155 inches in thickness, 32 inches in width, and 44 inches in length. Composed of a chromium-nickel alloy, it exhibits excellent tensile strength and yield strength suitable for high-stress environments. Its inherent passivation layer provides superior resistance to oxidation and chemical attack, ensuring longevity in corrosive atmospheres common in marine, industrial, and offshore lifting applications. The material's workability allows for precise fabrication into custom brackets, plates, and structural elements for cranes, hoists, and winches.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material integrity and dimensions against project requirements. 2. Prepare mounting surfaces, ensuring they are clean and free of contaminants. 3. Securely fasten the sheet using appropriate grade stainless steel fasteners and welding techniques, adhering to established engineering best practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners which will corrode and compromise the stainless steel's integrity. | Always use 304 or 316 grade stainless steel fasteners to maintain corrosion resistance and structural integrity. |
| Inadequate edge preparation for welding, leading to weak or porous joints. | Ensure edges are properly beveled and cleaned of all oils and debris prior to welding to achieve a strong, homogenous bond. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Fabrication of custom lifting brackets and hardware, Reinforcement plates for pulley systems, Structural components for winches and cranes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||