This 0.144-inch thick 304 stainless steel stock sheet offers superior strength and corrosion resistance, making it ideal for robust pulling and lifting applications where material integrity is paramount.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.144" |
| Length | 43" |
| Width | 30" |
Engineered for reliability and performance, this 304 stainless steel stock sheet boasts a substantial 0.144" thickness, providing exceptional load-bearing capacity. Measuring 43" in length and 30" in width, its 304 stainless steel composition ensures outstanding resistance to corrosion, rust, and pitting, even in harsh environments. This material's inherent toughness and durability make it a prime choice for fabricated components in marine, chemical processing, and heavy industrial settings requiring reliable pulling and lifting capabilities.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is properly supported and aligned with the intended structural interface. 2. Securely fasten the sheet using appropriate high-strength, corrosion-resistant hardware (e.g., stainless steel bolts, rivets). 3. Perform a thorough load test to verify structural integrity and adherence to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate fastening hardware that is not corrosion-resistant. | Always utilize high-strength, stainless steel fasteners (e.g., A4/316 grade) to match the sheet's corrosion resistance and prevent galvanic corrosion. |
| Overlooking proper load distribution, leading to stress concentrations. | Design the supporting structure to distribute loads evenly across the sheet's surface, avoiding point loading. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Reinforcement plates for lifting eyes and slings, Fabricated structural components in marine environments, Customizable backing plates for pulley systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||