Engineered for robust performance in demanding environments, this 304 stainless steel stock sheet provides exceptional strength and corrosion resistance for critical pulling and lifting applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.085" |
| Length | 42" |
| Width | 16" |
A high-performance industrial component, this 304 stainless steel stock sheet offers superior durability and resistance to corrosion, essential for applications subject to harsh conditions. With precise dimensions of 0.085 inches in thickness, 42 inches in length, and 16 inches in width, it meets stringent industrial requirements. The inherent properties of 304 stainless steel, including its excellent tensile strength and workability, make it ideal for custom fabrication of components such as custom sheaves, winch drums, lifting eyes, and structural reinforcement in marine and offshore equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from any contaminants. 2. Carefully measure and mark the desired cut lines according to fabrication drawings. 3. Utilize appropriate cutting tools, such as a waterjet or laser cutter, to achieve precise dimensions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for corrosive environments. | Always specify 304 stainless steel for applications exposed to moisture, chemicals, or saltwater to prevent premature rust and degradation. |
| Ignoring material fatigue in high-stress lifting applications. | Consult engineering specifications and consider stress analysis when designing fabricated components from this sheet to ensure long-term structural integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabricated winch components, Reinforcement plates for lifting equipment, Marine hardware fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||