Engineered for demanding hydraulic applications, this 304 stainless steel stock sheet offers superior corrosion resistance and robust performance. Its precise dimensions ensure seamless integration into your hydraulic systems.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.038" |
| Length | 37" |
| Width | 40" |
A proven choice for industrial professionals, this 304 stainless steel stock sheet (0.038" thickness, 37" length, 40" width) is manufactured to exacting standards. The inherent properties of 304 stainless steel, including its excellent corrosion resistance to a wide range of media and its inherent strength at operational temperatures, make it ideal for hydraulic manifold fabrication, pressure vessel components, and fluid transfer lines where chemical inertness and long-term durability are paramount. Its formability and weldability further enhance its utility in custom hydraulic system design.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all surfaces thoroughly to remove any contaminants. 2. Precisely cut the sheet to the required dimensions for your hydraulic manifold or component. 3. Weld or fasten the sheet according to established hydraulic engineering best practices and material specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower-grade stainless steel that is susceptible to corrosion in hydraulic fluid. | Always specify and verify 304 stainless steel or higher for hydraulic components to ensure long-term integrity. |
| Inadequate surface preparation before welding, leading to compromised weld strength. | Thoroughly degrease and clean weld areas, removing all mill scale and foreign matter prior to welding. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Hydraulic Fluid Reservoirs, Pressure Vessel Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||