This 304 stainless steel sheet provides robust corrosion resistance and high tensile strength, ideal for critical hydraulic system components. Its precise dimensions ensure seamless integration and long-term operational integrity.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.445" |
| Length | 19" |
| Width | 26" |
Engineered for reliability and performance, this 304 stainless steel stock sheet measures 0.445 inches thick, 19 inches in length, and 26 inches in width. Composed of 18-8 chromium-nickel, it offers superior resistance to corrosion, pitting, and crevice attack, making it an excellent choice for demanding hydraulic applications where fluid compatibility and environmental resilience are paramount. This material's excellent formability and weldability facilitate complex fabrication, ensuring structural integrity under high pressure and thermal cycling common in hydraulic circuits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensional accuracy against design specifications. 2. Clean surfaces thoroughly to remove contaminants. 3. Fabricate and integrate according to hydraulic system design standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel susceptible to corrosion in hydraulic fluid. | Always specify 304 stainless steel or equivalent for hydraulic applications to prevent premature material degradation and system failure. |
| Inadequate surface preparation leading to contamination. | Thoroughly degrease and clean all surfaces before any fabrication or assembly to maintain material integrity and prevent fluid contamination. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic manifold blocks, Pressure vessel construction, Hydraulic fluid reservoirs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||