This 304 stainless steel stock sheet is engineered for robust hydraulic system construction. Its superior corrosion resistance and mechanical strength ensure reliable performance in harsh environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.742" |
| Length | 33" |
| Width | 14" |
A high-performance industrial component, this 304 stainless steel stock sheet boasts precise dimensions of 0.742 inches in thickness, 33 inches in length, and 14 inches in width. Fabricated from AISI 304 stainless steel, it offers exceptional resistance to corrosion, pitting, and crevice attack, making it ideal for hydraulic fluid containment, manifold blocks, and structural support in high-pressure environments. Its high tensile strength and ductility allow for intricate machining and forming, ensuring tight tolerances and leak-free assemblies critical to hydraulic system integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris. 2. Accurately mark and cut the sheet to the required dimensions using appropriate metalworking tools. 3. Fabricate and weld according to system design specifications, adhering to industry best practices for stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive hydraulic environments. | Always specify 304 or higher grade stainless steel for hydraulic components exposed to moisture or corrosive fluids to prevent premature failure. |
| Insufficient material thickness for pressure requirements. | Verify that the 0.742" thickness meets or exceeds the maximum operating pressure and safety factors of the hydraulic system. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic manifold blocks, Custom hydraulic system housings, High-pressure fluid containment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||