This 304 stainless steel stock sheet is engineered for superior performance in critical hydraulic systems, offering exceptional corrosion resistance and long-term reliability.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.162" |
| Length | 19" |
| Width | 30" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet measures 0.162 inches in thickness, 19 inches in width, and 30 inches in length. Its 304 grade offers excellent resistance to a wide range of corrosive media commonly found in hydraulic fluid systems, ensuring component longevity and preventing premature failure. The material's inherent strength and ductility make it suitable for fabrication into various hydraulic components such as manifolds, reservoirs, and structural supports where integrity under pressure is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against system requirements. 2. Prepare edges for cutting or machining according to design specifications, ensuring smooth, burr-free surfaces. 3. Fabricate components using appropriate welding, forming, or machining techniques for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel in corrosive hydraulic environments. | Always specify and utilize 304 or higher grade stainless steel for hydraulic applications exposed to corrosive fluids or atmospheres. |
| Improper edge preparation leading to stress concentrations. | Ensure all cut or machined edges are smooth and free of notches or sharp changes in geometry to maintain structural integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Hydraulic Reservoir Fabrication, Sealing Surfaces in Hydraulic Cylinders.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||