This robust 304 stainless steel stock sheet is engineered for high-pressure hydraulic systems, offering superior corrosion resistance and durability in harsh industrial settings. Its precise dimensions ensure seamless integration into critical components.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.636" |
| Length | 39" |
| Width | 40" |
Designed for demanding industrial environments, this 304 stainless steel sheet offers exceptional strength and corrosion resistance. With a thickness of 0.636 inches, a length of 39 inches, and a width of 40 inches, it meets stringent material standards for hydraulic applications. The inherent properties of 304 stainless steel, including its excellent weldability and formability, make it ideal for fabricating robust hydraulic manifolds, pump housings, and valve blocks, ensuring long-term operational integrity under extreme pressures and fluid exposure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Prepare mating surfaces for welding or machining according to industry best practices. 3. Install into the hydraulic system assembly, ensuring proper alignment and secure fastening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade stainless steel susceptible to galvanic corrosion in hydraulic fluid. | Always specify 304 or 316 stainless steel for hydraulic system components exposed to corrosive fluids. |
| Inadequate surface preparation leading to poor weld penetration or sealing. | Thoroughly clean and degrease all surfaces to be joined, removing any mill scale, grease, or contaminants before fabrication. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Pump and Valve Body Construction, High-Pressure Fluid Power Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||