This 304 stainless steel stock sheet provides superior corrosion resistance and mechanical strength, ideal for fabricating critical hydraulic components where durability and fluid integrity are paramount.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.981" |
| Length | 34" |
| Width | 18" |
Engineered for reliability and performance, this 0.981-inch thick sheet of 304 stainless steel offers excellent resistance to a wide range of corrosive fluids and environments common in hydraulic systems. Its austenitic structure ensures good ductility and weldability, making it suitable for custom manifold blocks, reservoir fabrication, and structural supports. The precise dimensions of 34 inches in length and 18 inches in width facilitate efficient material utilization in complex hydraulic assemblies, guaranteeing long-term operational integrity and reduced maintenance cycles.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is thoroughly cleaned and free of contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate machining techniques for stainless steel. 3. Fabricate components according to design specifications, employing suitable welding or joining methods for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive hydraulic environments. | Always specify 304 stainless steel for its inherent corrosion resistance, preventing premature component failure and fluid contamination. |
| Improper cutting or machining of stainless steel. | Utilize appropriate tooling and techniques designed for stainless steel to avoid work hardening and maintain material integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Hydraulic Reservoir Construction, Corrosion-Resistant Hydraulic System Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||