This robust 0.760" thick 304 stainless steel stock sheet is engineered for critical hydraulic applications. Its superior corrosion resistance and mechanical integrity ensure reliable performance in harsh environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.760" |
| Length | 46" |
| Width | 33" |
A high-performance industrial component, this 304 stainless steel stock sheet measures 0.760 inches in thickness, 46 inches in length, and 33 inches in width. Fabricated from AISI 304 (UNS S30400) stainless steel, it provides exceptional resistance to a wide range of corrosive media commonly found in hydraulic systems, including many acids, alkaline solutions, and industrial fluids. The inherent strength and formability of this grade make it ideal for fabricating custom hydraulic manifolds, reservoir components, structural supports, and protective enclosures where long-term durability and hygiene are paramount. Its non-magnetic properties can also be advantageous in specific sensitive applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all mating surfaces thoroughly to remove any debris or contaminants. 2. Precisely cut and form the sheet to the required dimensions for the hydraulic component. 3. Securely fasten or weld the formed component according to established engineering best practices for hydraulic system integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower grade of stainless steel not rated for the specific hydraulic fluid or environmental conditions. | Always verify the material compatibility of 304 stainless steel with all hydraulic fluids, process chemicals, and environmental exposures to prevent premature corrosion or degradation. |
| Improper welding or fabrication techniques leading to reduced mechanical strength or compromised corrosion resistance. | Employ qualified welding procedures and skilled personnel to ensure the integrity of welds and maintain the inherent material properties of the 304 stainless steel. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Custom Hydraulic Reservoir Construction, Corrosion-Resistant Hydraulic System Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||