Engineered for demanding hydraulic environments, this 304 stainless steel stock sheet offers exceptional corrosion resistance and durability. Ideal for custom fabrication of hydraulic components, manifolds, and enclosures.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.484" |
| Length | 30" |
| Width | 23" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet measures 0.484 inches thick, 30 inches in length, and 23 inches in width. Composed of a chromium-nickel alloy, it provides superior resistance to a wide range of corrosive media commonly found in hydraulic systems, including water, most organic chemicals, and many inorganic chemicals. Its excellent formability and weldability allow for intricate customization, ensuring a perfect fit for your specialized hydraulic designs and preventing premature component failure due to material degradation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and surface finish against project requirements. 2. Prepare edges for cutting, bending, or welding using appropriate machining techniques. 3. Fabricate and integrate into the hydraulic system, ensuring proper sealing and structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel not resistant to hydraulic fluid corrosives. | Always specify 304 stainless steel or higher for hydraulic applications to ensure longevity and prevent contamination. |
| Inadequate edge preparation leading to weld defects or stress risers. | Properly bevel and clean all edges before any welding or forming operations to ensure robust connections. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Custom Hydraulic Enclosures, Structural Components for Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||