This 304 stainless steel stock sheet is engineered for critical hydraulic systems. Its robust construction and corrosion resistance ensure reliability and longevity in demanding industrial environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.264" |
| Length | 15" |
| Width | 30" |
A high-performance industrial component, this 0.264-inch thick 304 stainless steel stock sheet measures 15 inches in length and 30 inches in width. Fabricated from AISI 304 stainless steel, it offers excellent corrosion resistance, particularly against a wide range of atmospheric and chemical agents. The material's inherent strength and ductility make it suitable for fabrication into various hydraulic components, including reservoirs, manifold blocks, and structural supports within fluid power systems. Its non-magnetic properties and smooth surface finish are advantageous in preventing fluid contamination and ensuring efficient flow.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants before fabrication. 2. Accurately measure and mark cut lines according to design specifications. 3. Utilize appropriate cutting tools designed for stainless steel to achieve precise dimensions and smooth edges. 4. Perform bending, machining, or welding operations following established best practices for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tools for cutting or machining. | Employ dedicated stainless steel cutting and machining tools to prevent carbon steel contamination and ensure clean cuts. |
| Inadequate edge preparation after cutting. | Deburr and smooth all cut edges to prevent stress risers and potential fluid cavitation. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Reservoir Fabrication, Manifold Block Machining, Structural Supports in Fluid Power Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||