Engineered for robust hydraulic applications, this 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength. Its precise dimensions ensure reliable performance in critical fluid power systems.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.114" |
| Length | 41" |
| Width | 17" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet provides exceptional durability and corrosion resistance essential for demanding hydraulic environments. Measuring 0.114 inches (2.90 mm) thick, 41 inches (1041 mm) in length, and 17 inches (432 mm) in width, it adheres to stringent material specifications. The inherent properties of 304 stainless steel, including its excellent resistance to a wide range of corrosive media and its high tensile strength, make it ideal for fabricating hydraulic manifolds, valve bodies, and specialized fluid conveyance components where purity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material certification against project specifications. 2. Prepare edges for fabrication using appropriate cutting and deburring techniques. 3. Integrate into hydraulic system design according to established engineering schematics.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper edge preparation leading to stress concentration. | Ensure all cut edges are thoroughly deburred and smoothed to prevent premature failure. |
| Using in environments exceeding 304 stainless steel's corrosion resistance. | Consult material compatibility charts for specific fluids and operating conditions to confirm suitability. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Custom Hydraulic Component Machining, Corrosion-Resistant Fluid Power Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||