This 0.110-inch thick, 304 stainless steel sheet is engineered for superior performance in demanding hydraulic applications. Its exceptional corrosion resistance and mechanical strength ensure reliability and longevity in harsh industrial settings.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.110" |
| Length | 13" |
| Width | 24" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet offers a robust solution for hydraulic system components. Measuring 0.110 inches in thickness, 13 inches in length, and 24 inches in width, it provides substantial material for fabrication. The inherent properties of 304 stainless steel, including its excellent resistance to corrosion, oxidation, and a wide range of chemicals, make it ideal for use in fluid power systems where fluid compatibility and environmental resilience are paramount. This material's high tensile strength and formability allow for precise machining and forming into critical hydraulic manifolds, fittings, and structural supports, ensuring operational integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Precisely cut the sheet to the required dimensions for your hydraulic component. 3. Fabricate and integrate the component according to detailed hydraulic system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive hydraulic environments. | Always specify 304 stainless steel or equivalent for hydraulic components exposed to moisture, chemicals, or saltwater. |
| Inadequate surface preparation before welding or forming. | Thoroughly clean the stainless steel surface to remove any contaminants that could compromise weld integrity or material properties. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Custom Hydraulic Fittings, Corrosion-Resistant Hydraulic Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||