Engineered for robust hydraulic applications, this 304 stainless steel sheet offers superior corrosion resistance and mechanical integrity. Its precise dimensions ensure seamless integration into critical fluid power systems.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.054" |
| Length | 44" |
| Width | 27" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet is manufactured to exacting tolerances. With a nominal thickness of 0.054 inches, a length of 44 inches, and a width of 27 inches, it provides ample material for fabricating components requiring excellent resistance to chemical attack and extreme temperatures. The inherent strength and non-magnetic properties of 304 stainless steel make it ideal for use in high-pressure hydraulic manifolds, reservoirs, and specialized fittings where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the 304 stainless steel sheet to the required dimensions using appropriate cutting tools suitable for stainless steel. 2. Deburr all cut edges thoroughly to prevent stress concentration and ensure smooth surface finish. 3. Form or machine the sheet into the desired hydraulic component according to design specifications, ensuring adherence to tolerances.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for hydraulic components exposed to corrosive fluids. | Always specify and utilize 304 stainless steel or higher-grade stainless steel for hydraulic systems in corrosive environments to prevent premature failure due to oxidation and pitting. |
| Inadequate edge preparation after cutting. | Thoroughly deburr and smooth all cut edges to remove sharp points and potential stress risers, which can lead to cracking or premature wear in high-pressure hydraulic applications. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Hydraulic Reservoir Fabrication, Custom Hydraulic Fitting Construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||