This 304 stainless steel stock sheet provides robust performance and superior corrosion resistance for critical hydraulic system components. Engineered for longevity and reliability in challenging environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.386" |
| Length | 43" |
| Width | 32" |
Built to exacting engineering tolerances, this 0.386" thick, 43" long, and 32" wide 304 stainless steel sheet offers exceptional dimensional stability and a smooth surface finish, crucial for minimizing fluid leakage and wear in hydraulic systems. The inherent passivation layer of 304 stainless steel provides excellent resistance to a wide range of corrosive media, including hydraulic fluids, saltwater, and various industrial chemicals, ensuring extended component lifespan and reduced maintenance requirements. Its high tensile strength and formability make it ideal for fabrication of manifolds, reservoirs, and structural supports within high-pressure hydraulic circuits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and fabrication processes maintain the specified material integrity. 2. Thoroughly clean all surfaces to remove any residual contaminants before assembly. 3. Integrate the fabricated components into the hydraulic system following established design specifications and torque values.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible cutting or welding methods that could alter the stainless steel's corrosion resistance. | Employ stainless steel specific cutting tools and welding procedures, and ensure post-weld passivation. |
| Insufficient cleaning of surfaces leading to contamination within the hydraulic fluid. | Implement rigorous cleaning protocols using appropriate solvents before and during assembly. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Hydraulic Reservoir Construction, Structural Components for Marine Hydraulics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||