This 0.251-inch thick 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength, ideal for fabricating critical components in pressure and temperature control systems.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.251" |
| Length | 24" |
| Width | 32" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet meets stringent performance requirements for demanding environments. With precise dimensions of 0.251" thickness, 24" length, and 32" width, it provides ample material for custom fabrication. The austenitic 304 grade offers excellent weldability, formability, and resistance to a wide range of corrosive media, making it a preferred choice for pressure vessels, heat exchangers, and thermal management components where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free from contaminants. 2. Accurately cut the sheet to the required dimensions using appropriate tooling. 3. Fabricate and integrate the component into the pressure/temperature control system following system-specific design and safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to burrs or deformation. | Employ sharp, carbide-tipped blades or abrasive cutting wheels designed for stainless steel to ensure clean cuts and maintain material integrity. |
| Inadequate cleaning of the sheet before welding or forming. | Thoroughly degrease and deburr the sheet edges and any areas that will undergo fabrication to prevent weld defects and ensure proper forming. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, Thermal management systems, High-temperature fluid handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||