This 304 stainless steel stock sheet offers exceptional corrosion and heat resistance, engineered for superior performance in demanding industrial settings. Its robust construction ensures longevity and reliability.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.147" |
| Length | 45" |
| Width | 30" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet measures 0.147 inches in thickness, 45 inches in length, and 30 inches in width. Fabricated from Type 304 stainless steel, it provides excellent resistance to a wide range of corrosive media and elevated temperatures, making it suitable for applications in pressure vessels, heat exchangers, food processing equipment, and chemical processing components. Its inherent strength and durability ensure structural integrity under significant thermal and mechanical stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification. 2. Prepare cutting and shaping equipment according to fabrication requirements. 3. Ensure proper welding procedures and consumables are used if joining.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for stainless steel, leading to poor edge quality. | Employ abrasive cutting, plasma cutting, or waterjet cutting specifically rated for stainless steel to achieve clean, precise edges. |
| Inadequate post-weld cleaning, resulting in carbide precipitation and reduced corrosion resistance. | Perform thorough pickling and passivation after welding to remove surface contaminants and restore the protective oxide layer. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure Vessel Fabrication, Heat Exchanger Components, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||