This robust 0.658" thick 304 stainless steel sheet offers superior corrosion resistance and mechanical strength, making it an essential component for demanding pressure and temperature control systems.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.658" |
| Length | 40" |
| Width | 23" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet features a precise thickness of 0.658 inches, with dimensions of 40 inches in length and 23 inches in width. Composed of 18% chromium and 8% nickel, its excellent corrosion resistance, high tensile strength, and formability make it suitable for applications involving elevated pressures and temperatures, such as heat exchangers, pressure vessels, and critical piping systems. Its non-magnetic nature and resistance to oxidation further enhance its reliability in harsh environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Accurately cut to the required dimensions using appropriate cutting tools. 3. Fabricate and join using approved welding procedures for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper cutting tools, leading to burrs and material deformation. | Employ carbide-tipped blades or waterjet cutting for clean, precise cuts. |
| Inadequate surface preparation before welding, causing weld contamination. | Thoroughly degrease and remove any oxide layers from the weld area. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, High-temperature piping systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||