This 304 stainless steel stock sheet is a robust material solution for critical pulling and lifting applications. Its inherent strength and corrosion resistance ensure reliable performance in challenging environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.109" |
| Length | 28" |
| Width | 26" |
Engineered for reliability and performance, this 304 stainless steel stock sheet boasts a thickness of 0.109 inches, a length of 28 inches, and a width of 26 inches. Composed of 18% chromium and 8% nickel, 304 stainless steel provides exceptional resistance to corrosion, oxidation, and a wide range of chemicals, making it ideal for marine, industrial, and food processing environments. Its high tensile strength and ductility allow it to withstand significant mechanical stress, ensuring longevity in repeated pulling and lifting operations. This sheet conforms to stringent industry standards, guaranteeing consistent material integrity and predictable performance characteristics.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface where the sheet will be applied thoroughly to remove any contaminants. 2. Position the sheet accurately according to the required design or structural layout. 3. Secure the sheet using appropriate fastening methods such as welding, bolting, or riveting, ensuring all connections are robust and meet load-bearing requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inappropriate fasteners that will corrode in the intended environment. | Utilize stainless steel fasteners (304 or higher grade) to maintain the integrity of the overall assembly and prevent galvanic corrosion. |
| Insufficient edge preparation before welding, leading to weak joints. | Ensure all edges are properly beveled and cleaned according to welding procedure specifications to achieve full penetration and a strong weld. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabricated lifting hardware, Reinforcement plates for rigging equipment, Components in marine pulling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||