This 304 stainless steel stock sheet provides exceptional corrosion resistance and robust mechanical properties, essential for high-pressure hydraulic systems and demanding industrial environments. Its precise dimensions ensure reliable component fabrication.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.338" |
| Length | 36" |
| Width | 19" |
Trusted by engineers across multiple sectors, this 304 stainless steel stock sheet, measuring 0.338 inches in thickness, 36 inches in length, and 19 inches in width, is engineered for superior performance in hydraulic applications. The inherent passivation layer of 304 stainless steel provides excellent resistance to a wide range of corrosive media, including water, many organic chemicals, and acids. Its high tensile and yield strength ensure structural integrity under significant pressure and stress. This material is widely recognized for its weldability and formability, facilitating complex component manufacturing without compromising material integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Precisely cut to required dimensions using appropriate tooling. 3. Fabricate components according to design specifications, adhering to best practices for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to material stress or warping. | Utilize high-quality, sharp cutting tools specifically designed for stainless steel to maintain material integrity. |
| Inadequate surface preparation before welding or forming. | Thoroughly degrease and clean the surface of the stainless steel sheet to prevent weld contamination and ensure proper forming. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifolds, Pressure Vessels, Component Fabrication, Corrosion-Resistant Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||