This robust 304 stainless steel stock sheet provides superior corrosion resistance and mechanical integrity, essential for high-pressure hydraulic systems and components. Precisely manufactured for demanding industrial environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.690" |
| Length | 41" |
| Width | 36" |
Built to exacting engineering tolerances, this 304 stainless steel sheet boasts a thickness of 0.690 inches, a length of 41 inches, and a width of 36 inches. The 304 alloy offers excellent corrosion resistance, particularly against a wide range of atmospheric and chemical agents, making it ideal for environments where fluid containment and structural integrity are paramount. Its inherent strength and ductility allow for machining and forming into complex hydraulic manifold blocks, pressure vessels, and specialized structural components within hydraulic systems. This material meets industry standards for material composition and dimensional accuracy, ensuring reliable performance in critical fluid power applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and surface finish against project specifications. 2. Carefully cut to required dimensions using appropriate machining or cutting tools suitable for stainless steel. 3. Deburr all edges to prevent particulate contamination within hydraulic systems and ensure safe handling.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive hydraulic environments. | Always specify 304 or 316 stainless steel for its superior corrosion resistance in hydraulic applications, preventing premature failure and contamination. |
| Inadequate edge preparation after cutting. | Thoroughly deburr all cut edges to prevent loose particles from entering the hydraulic system, which can cause damage to pumps, valves, and actuators. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Pressure Vessel Components, Corrosion-Resistant Hydraulic Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||