This 0.701-inch thick 304 stainless steel stock sheet offers exceptional corrosion resistance and durability. Precisely sized at 29" x 15", it's engineered for demanding plumbing and janitorial applications where material integrity is paramount.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.701" |
| Length | 29" |
| Width | 15" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet measures 0.701 inches in thickness, with a nominal length of 29 inches and a width of 15 inches. Composed of approximately 18% chromium and 8% nickel, this austenitic stainless steel alloy provides excellent resistance to oxidation and general corrosion, making it highly suitable for environments exposed to moisture, chemicals, and cleaning agents. Its robust nature ensures longevity and structural integrity in heavy-duty plumbing systems, drain channels, wall cladding, and custom fabrication for janitorial facilities.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation surface is clean, dry, and structurally sound. 2. Carefully position the 304 stainless steel sheet, aligning it with pre-marked guidelines or structural supports. 3. Secure the sheet using appropriate fasteners (e.g., stainless steel screws, rivets, or welding techniques suitable for 304 SS), ensuring even distribution of load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fasteners that can lead to galvanic corrosion. | Always use 304 or 316 grade stainless steel fasteners, or other materials specified for compatibility with 304 stainless steel, to prevent corrosion. |
| Improper handling leading to scratches or dents on the surface. | Handle the sheet with care, utilizing appropriate lifting equipment and protective coverings during transport and installation to maintain surface integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication of drain pans and sumps, Wall and partition panels in high-moisture areas, Backsplashes and counter surfaces in commercial kitchens and labs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||