This 304 stainless steel stock sheet is engineered for robust performance in hydraulic applications. Its superior corrosion resistance and mechanical strength ensure reliability in challenging environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.156" |
| Length | 47" |
| Width | 23" |
A high-performance industrial component, this 0.156" thick sheet of 304 stainless steel offers exceptional corrosion resistance, crucial for hydraulic systems exposed to diverse fluids and environmental conditions. Measuring 47" in length and 23" in width, it provides ample material for fabricating critical hydraulic manifold blocks, valve bodies, and structural components. The austenitic 304 grade provides excellent weldability and formability, facilitating complex designs while maintaining integrity. Its non-magnetic properties are advantageous in sensitive hydraulic circuits, preventing interference. This sheet is ideal for applications requiring long-term durability and resistance to wear and tear.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions against design specifications. 2. Clean the sheet thoroughly to remove any surface contaminants. 3. Fabricate components according to engineering drawings, ensuring precise machining and welding procedures.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel susceptible to corrosion in hydraulic fluid. | Always specify and utilize 304 stainless steel or higher for hydraulic system components. |
| Inadequate surface preparation leading to weld defects. | Thoroughly degrease and clean all surfaces to be welded or machined to ensure optimal adhesion and structural integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Valve Bodies, Hydraulic Cylinder Components, Fluid Reservoirs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||