This robust 304 stainless steel stock sheet is precision-engineered for critical hydraulic applications. Its substantial thickness and dimensional stability ensure superior performance and longevity in demanding environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.443" |
| Length | 38" |
| Width | 39" |
Engineered for reliability and performance, this 0.443-inch thick 304 stainless steel sheet measures 38 inches in length and 39 inches in width. Composed of austenitic stainless steel, it offers excellent corrosion resistance to a wide range of hydraulic fluids and environmental factors. The material's inherent strength and ductility make it ideal for fabricating custom hydraulic manifolds, valve bodies, reservoir components, and structural supports where integrity and fluid containment are paramount. Its non-magnetic properties and resistance to pitting and crevice corrosion further enhance its suitability for high-pressure, corrosive, or sanitary hydraulic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Carefully cut the sheet to the required component shape using appropriate machining techniques (e.g., waterjet, laser cutting, milling). 3. Deburr all cut edges to prevent fluid contamination and potential operator injury.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for hydraulic components exposed to corrosive fluids. | Always specify 304 or 316 stainless steel for hydraulic components intended for corrosive environments or to prevent rust contamination. |
| Insufficient edge preparation after cutting. | Thoroughly deburr all edges after cutting to ensure smooth flow paths and prevent particulate generation within the hydraulic system. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Hydraulic Manifold Fabrication, High-Pressure Hydraulic Reservoir Construction, Specialized Hydraulic Valve Bodies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||