This robust 304 stainless steel stock sheet offers exceptional durability and corrosion resistance. Its precise dimensions make it suitable for various pressure and temperature control systems requiring reliable material performance.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.391" |
| Length | 31" |
| Width | 31" |
Manufactured under strict quality controls, this 0.391" thick stock sheet is fabricated from premium 304 stainless steel, renowned for its excellent corrosion resistance, weldability, and mechanical strength across a wide temperature range. The sheet measures 31" in length and 31" in width, providing ample material for fabrication in critical applications. Its composition ensures suitability for environments subjected to elevated pressures and fluctuating temperatures, preventing material degradation and maintaining structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Prepare mating surfaces for welding or fastening, ensuring cleanliness and proper fit. 3. Fabricate and integrate the sheet into the pressure/temperature control system according to design blueprints and safety standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect gauge for the intended pressure/temperature rating. | Always consult ASME or relevant industry codes to determine the minimum required material thickness for the specific operating parameters. |
| Inadequate surface preparation prior to welding, leading to compromised joint integrity. | Thoroughly degrease and remove any surface contaminants from the weld area using appropriate solvents and abrasive methods. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel components, Heat exchanger plates, High-temperature ducting, Cryogenic equipment fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||