This robust 304 stainless steel stock sheet is engineered for demanding heating and cooling applications. Its superior corrosion resistance and high-temperature tolerance ensure reliable performance in harsh industrial environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.895" |
| Length | 28" |
| Width | 45" |
A high-performance industrial component, this 304 stainless steel stock sheet offers exceptional durability and resilience. Measuring 0.895 inches in thickness, 28 inches in length, and 45 inches in width, it is fabricated from Austenitic grade 304 stainless steel, renowned for its excellent corrosion resistance to a wide range of corrosive media, and superior strength at elevated temperatures. This material composition makes it ideal for fabrication of heat exchangers, furnace parts, ductwork, and other critical components within heating and cooling systems where thermal cycling and chemical exposure are prevalent. Its formability and weldability facilitate complex designs and robust construction.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and condition against project requirements. 2. Fabricate to specific design using appropriate cutting, bending, and welding techniques for 304 stainless steel. 3. Install fabricated component into the heating or cooling system, ensuring proper sealing and structural support.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can lead to carbide precipitation and reduced corrosion resistance. | Utilize dedicated stainless steel cutting tools and procedures to maintain the integrity of the material's passive layer. |
| Inadequate cleaning post-fabrication, leaving behind contaminants that can initiate corrosion. | Thoroughly clean the fabricated component using appropriate degreasers and passivation treatments to remove all residual contaminants. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, Furnace and Oven Components, Industrial Ductwork Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||