This robust 304 stainless steel stock sheet is engineered for superior performance in demanding heating and cooling environments. Its substantial 0.676" thickness ensures durability and thermal stability for critical applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.676" |
| Length | 35" |
| Width | 35" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet provides exceptional corrosion resistance and high-temperature strength, crucial for HVAC systems and industrial heating components. With precise dimensions of 0.676" thickness, 35" length, and 35" width, it meets stringent industry standards for heat exchangers, ductwork, and thermal insulation barriers. The inherent properties of 304 stainless steel, including its chromium and nickel content, ensure longevity and reliability in harsh thermal cycling and humid conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. Verify sheet dimensions against project specifications. 2. Carefully position the sheet for cutting, bending, or welding using appropriate lifting equipment if necessary. 3. Secure the sheet firmly before commencing any fabrication processes, adhering to industry best practices for stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools or techniques, leading to burrs or deformation. | Employ specialized carbide or diamond-tipped blades designed for stainless steel, and maintain a consistent cutting speed and feed rate. |
| Inadequate preparation of the surface for welding, resulting in poor weld integrity. | Thoroughly clean the weld area using stainless steel brushes and degreasers to remove any contaminants, oils, or oxide layers. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Industrial Heat Exchanger Components, High-Temperature Ducting and Ventilation, Thermal Insulation Barriers in HVAC Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||