Engineered from high-grade 304 stainless steel, this substantial stock sheet offers exceptional durability and corrosion resistance for critical heating and cooling systems. Ideal for demanding industrial fabrication.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.749" |
| Length | 28" |
| Width | 46" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet offers superior performance in high-temperature and corrosive applications. Measuring 0.749 inches thick, 28 inches in length, and 46 inches in width, its composition of chromium and nickel provides excellent resistance to oxidation and pitting. This material is ideal for fabricating heat exchangers, furnace components, ductwork, and other critical parts within HVAC and industrial process heating systems where thermal stability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and inspect for any surface defects. 2. Prepare edges according to fabrication requirements (e.g., beveling for welding). 3. Install using appropriate joining methods (welding, fastening) for the specific application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel for high-temperature applications. | Always specify 304 stainless steel or higher for applications involving significant heat to prevent premature degradation and ensure longevity. |
| Inadequate surface preparation before fabrication. | Ensure the surface is clean and free from contaminants to achieve optimal weld quality and corrosion resistance. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Construction, Industrial Furnace Components, High-Temperature Ducting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||