This 304 stainless steel stock sheet offers superior corrosion resistance and durability. Precisely manufactured to 0.505" thickness, 33" width, and 46" length, it's engineered for reliable performance in challenging heating and cooling environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.505" |
| Length | 33" |
| Width | 46" |
Built to exacting engineering tolerances, this 304 stainless steel sheet exhibits exceptional strength and formability. With a nominal thickness of 0.505 inches, a width of 46 inches, and a length of 33 inches, it meets stringent industry standards for HVAC components, heat exchangers, and industrial ductwork. The inherent chromium-nickel composition of 304 stainless steel provides excellent resistance to oxidation and pitting corrosion, making it suitable for elevated temperatures and exposure to various atmospheric conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Fabricate to precise design specifications using appropriate cutting and forming tools. 3. Securely install using approved welding, bolting, or riveting methods as per application requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper cutting tools that can cause work hardening and reduce corrosion resistance. | Utilize high-speed steel or carbide cutting tools designed for stainless steel, maintaining consistent feed rates and adequate lubrication. |
| Inadequate cleaning post-fabrication, leading to surface contamination and potential corrosion. | Thoroughly degrease and passivation the fabricated components after all manufacturing processes are complete. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Components, Industrial Oven Linings, HVAC Ductwork Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||