This premium 304 stainless steel stock sheet, precisely sized at 0.895" x 28" x 40", offers exceptional corrosion resistance and strength for critical pressure and temperature control systems.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.895" |
| Length | 28" |
| Width | 40" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet features a nominal thickness of 0.895 inches, a width of 40 inches, and a length of 28 inches. Composed of a chromium-nickel alloy, it exhibits superior resistance to oxidation and a wide range of corrosive media, making it ideal for high-pressure environments and elevated temperature applications where material integrity is paramount. Its formability and weldability facilitate integration into complex system designs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of contaminants. 2. Carefully position the 304 stainless steel sheet according to design specifications. 3. Securely fasten the sheet using appropriate mechanical fasteners or welding techniques as per the project blueprint.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive environments. | Always select 304 stainless steel for applications involving corrosive chemicals or high humidity to prevent premature degradation. |
| Inadequate support leading to sheet deformation under pressure. | Ensure sufficient structural support is provided for the sheet, especially in high-pressure or high-temperature applications, to maintain its intended geometry. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel construction, High-temperature heat exchangers, Corrosion-resistant piping and ducting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||