This robust 304 stainless steel stock sheet offers exceptional durability and corrosion resistance. Precisely manufactured to 0.996" thickness, 16" length, and 17" width, it's ideal for critical pressure and temperature control systems.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.996" |
| Length | 16" |
| Width | 17" |
Trusted by engineers across multiple sectors, this 304 stainless steel stock sheet is engineered for environments demanding superior performance. With precise dimensions of 0.996" thickness, 16" length, and 17" width, it provides a substantial platform for fabrication. The inherent properties of 304 stainless steel, including excellent tensile strength, ductility, and resistance to a wide range of corrosive media and elevated temperatures, make it an ideal material for pressure vessels, heat exchangers, and other critical components within pressure and temperature control systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and integrity before cutting or fabrication. 2. Ensure all cutting, bending, and welding processes are performed according to industry best practices for 304 stainless steel. 3. Clean surfaces thoroughly post-installation to remove any contaminants that could compromise corrosion resistance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tooling for fabrication, leading to contamination and reduced corrosion resistance. | Utilize dedicated stainless steel tooling and equipment to prevent cross-contamination. |
| Improper post-weld cleaning, leaving behind scale or slag that can initiate corrosion. | Implement thorough pickling and passivation procedures after welding to restore the passive oxide layer. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure Vessel Fabrication, Heat Exchanger Components, High-Temperature Ducting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||