This 0.387-inch thick 304 stainless steel sheet is engineered for robust performance in challenging heating and cooling environments. Its superior corrosion resistance and thermal stability make it an indispensable component for critical industrial systems.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.387" |
| Length | 24" |
| Width | 40" |
A high-performance industrial component, this 304 stainless steel stock sheet boasts a nominal thickness of 0.387 inches, with precise dimensions of 24 inches in length and 40 inches in width. Fabricated from Type 304 stainless steel, it offers exceptional resistance to oxidation and a wide range of corrosive media, crucial for maintaining integrity in high-temperature and moisture-rich heating and cooling systems. The alloy's inherent strength and ductility facilitate fabrication and assembly, ensuring reliable long-term performance in demanding thermal management applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean, dry, and free from debris. 2. Carefully position the 304 stainless steel sheet according to design specifications, utilizing appropriate lifting equipment if necessary. 3. Secure the sheet using approved fastening methods, ensuring proper alignment and structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fasteners that can lead to galvanic corrosion. | Always use stainless steel fasteners of equivalent or higher grade to prevent galvanic corrosion and ensure material compatibility. |
| Inadequate edge preparation before welding or joining. | Thoroughly clean and prepare all edges to be joined, removing any contaminants, scale, or surface imperfections to ensure strong and corrosion-resistant welds. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat exchanger fabrication, Ductwork for industrial HVAC systems, Components for high-temperature processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||