This 304 stainless steel stock sheet provides robust, corrosion-resistant material for critical hydraulic system components. Precisely manufactured to exacting dimensions, it ensures reliable performance in challenging environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.387" |
| Length | 31" |
| Width | 18" |
Manufactured under strict quality controls, this 0.387-inch thick sheet is fabricated from premium 304 stainless steel, renowned for its excellent corrosion resistance, weldability, and general durability. The dimensions of 31 inches in length and 18 inches in width offer a substantial surface area suitable for fabricating custom hydraulic manifold blocks, structural supports, fluid containment, or specialized fittings. Its non-magnetic properties and resistance to a wide range of chemicals make it ideal for environments where contamination or material degradation is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and surface finish against project specifications. 2. Carefully cut sheet to required dimensions using appropriate cutting tools (e.g., waterjet, plasma, or abrasive saw). 3. Deburr all cut edges to prevent material fatigue and ensure safety during subsequent handling and fabrication.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower grade stainless steel for hydraulic components. | Always select 304 or higher grade stainless steel for hydraulic applications to ensure long-term corrosion resistance and structural integrity. |
| Inadequate edge preparation after cutting. | Thoroughly deburr all cut edges to remove stress risers and potential points of failure, especially in high-pressure hydraulic systems. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Hydraulic Manifold Fabrication, Hydraulic Fluid Reservoirs and Containment, Structural Supports for Hydraulic Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||