This 304 stainless steel stock sheet is engineered for demanding environments. Its 0.068" thickness and precise dimensions offer exceptional performance in pressure and temperature control systems, ensuring reliability and longevity.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.068" |
| Length | 25" |
| Width | 26" |
A high-performance industrial component, this 0.068-inch thick 304 stainless steel stock sheet measures 25 inches in length and 26 inches in width. Manufactured from AISI 304 stainless steel, it exhibits excellent corrosion resistance, superior tensile strength, and formability, making it suitable for a wide range of critical applications. The material's inherent resistance to oxidation and pitting at elevated temperatures ensures operational integrity under demanding thermal and pressure fluctuations. This stock sheet is ideal for fabricating components within pressure vessels, heat exchangers, and various process equipment where material stability and safety are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Accurately cut to required dimensions using appropriate metal-cutting tools. 3. Fabricate and integrate into the pressure or temperature control system following design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools not designed for stainless steel. | Utilize carbide-tipped or high-speed steel cutting tools specifically designed for stainless steel to prevent premature wear and ensure clean cuts. |
| Inadequate cleaning after fabrication, leading to potential surface contamination. | Thoroughly degrease and rinse the fabricated component with a mild detergent and water solution, followed by a clean water rinse, before final assembly. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, Industrial piping and fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||