Engineered for extreme environments, this 304 stainless steel sheet provides exceptional performance in critical heating and cooling applications. Its robust construction ensures longevity and reliability.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.546" |
| Length | 29" |
| Width | 34" |
Purpose-built for heavy-duty applications, this 0.546-inch thick, 29-inch by 34-inch sheet of 304 stainless steel delivers superior performance in demanding thermal management systems. The 304 alloy, known for its excellent corrosion resistance, particularly against oxidizing acids and general atmospheric corrosion, makes it ideal for environments subject to moisture and elevated temperatures. Its substantial thickness provides enhanced structural integrity for heat exchangers, furnace components, industrial ovens, and other high-stress heating and cooling apparatus. The material's inherent strength and thermal properties are optimized for heat transfer efficiency and prolonged operational life under continuous duty cycles.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely position the stainless steel sheet according to design specifications. 3. Securely fasten the sheet using appropriate industrial-grade fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper handling leading to scratches or dents. | Use clean, non-abrasive gloves and avoid dragging the sheet across rough surfaces. Utilize protective film if available. |
| Inadequate fastener selection leading to structural failure. | Consult engineering drawings for recommended fastener type, size, and spacing. Utilize fasteners compatible with 304 stainless steel to prevent galvanic corrosion. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Industrial Heat Exchanger Fabrication, Furnace and Kiln Linings, High-Temperature Oven Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||