This 0.875-inch thick 304 stainless steel sheet offers exceptional durability and corrosion resistance. Precisely manufactured to 22" x 34", it is the robust solution for high-temperature and corrosive environments in heating and cooling systems.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.875" |
| Length | 22" |
| Width | 34" |
Engineered for reliability and performance, this 304 stainless steel stock sheet boasts a substantial 0.875" thickness, ensuring structural integrity under demanding thermal loads. Its 22" x 34" dimensions provide ample material for custom fabrication in various heating and cooling applications. The inherent properties of 304 stainless steel, including excellent resistance to oxidation and corrosion, make it ideal for components exposed to aggressive media and elevated temperatures. This material's formability and weldability further enhance its utility in creating efficient and long-lasting heat exchangers, ductwork, and other critical system parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material grade against project specifications. 2. Prepare surfaces for cutting, bending, or welding according to industry best practices for 304 stainless steel. 3. Fabricate components, ensuring proper joint design and welding procedures to maintain material integrity and corrosion resistance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can cause contamination and lead to premature corrosion. | Employ dedicated stainless steel cutting tools or ensure thorough cleaning of shared tools before use. |
| Inadequate ventilation during welding, leading to porosity and reduced joint strength. | Ensure proper shielding gas flow and adequate ventilation when welding 304 stainless steel. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, Industrial Oven Linings, High-Temperature Ductwork.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||