This 304 stainless steel stock sheet provides exceptional strength and corrosion resistance for demanding pulling and lifting applications. Its robust construction ensures reliability in harsh environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.237" |
| Length | 45" |
| Width | 14" |
Trusted by engineers across multiple sectors, this 0.237-inch thick 304 stainless steel sheet offers superior tensile strength and fatigue resistance, crucial for dynamic load-bearing components. Measuring 45 inches in length and 14 inches in width, its austenitic structure (18% chromium, 8% nickel) guarantees excellent corrosion resistance against a wide range of chemicals and atmospheric conditions, making it ideal for marine, industrial lifting equipment, and structural reinforcement in corrosive environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris. 2. Accurately mark and cut the sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using approved fastening methods, such as welding or bolting, ensuring structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to edge deformation. | Utilize carbide-tipped blades or abrasive cutting wheels specifically designed for stainless steel to maintain edge integrity. |
| Inadequate surface preparation before welding. | Thoroughly degrease and remove any oxide layers from the weld area using stainless steel brushes or abrasive pads to prevent weld contamination. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication for pulling mechanisms, Reinforcement plates for lifting hardware, Components in marine-grade lifting equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||