This robust 304 stainless steel stock sheet is engineered for demanding hydraulic applications. Its superior corrosion resistance and mechanical strength ensure reliable performance in harsh environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.253" |
| Length | 34" |
| Width | 25" |
A proven choice for industrial professionals, this 304 stainless steel stock sheet offers exceptional durability and corrosion resistance, critical for hydraulic system integrity. Measuring 0.253 inches thick, 34 inches in length, and 25 inches in width, it meets stringent industry standards for material composition, including a minimum tensile strength of 515 MPa and yield strength of 205 MPa. The inherent passivation layer of 304 stainless steel protects against a wide range of corrosive media, making it suitable for high-pressure fluid handling, component fabrication, and structural elements within hydraulic manifolds and assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Prepare edges and surfaces for joining or machining according to established engineering drawings. 3. Install and secure the sheet within the hydraulic system, ensuring proper sealing and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade stainless steel or carbon steel in corrosive hydraulic environments. | Always specify and utilize 304 (or higher) stainless steel for applications exposed to aggressive fluids or external corrosive elements to prevent premature failure. |
| Improper handling or storage leading to surface contamination or damage. | Store sheets in a clean, dry environment and handle with appropriate lifting equipment to avoid scratches, dents, or particulate contamination that could compromise the passivation layer. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, High-Pressure Fluid Reservoirs, Corrosion-Resistant Hydraulic Component Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||