Engineered for demanding environments, this 304 stainless steel stock sheet offers superior corrosion resistance and durability. Its substantial thickness and generous dimensions make it ideal for heavy-duty plumbing and janitorial infrastructure.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.421" |
| Length | 29" |
| Width | 33" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet is manufactured to exacting standards for critical applications. Measuring 0.421 inches (approximately 10.7 mm) in thickness, with a length of 29 inches and a width of 33 inches, it provides a robust platform for fabrication. The 304 grade offers excellent resistance to a wide range of corrosive media, making it suitable for environments exposed to moisture, cleaning agents, and moderate chemical compounds. Its high tensile strength and formability allow for precise customization in complex installations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from debris before fabrication. 2. Utilize appropriate cutting and forming tools designed for thick stainless steel. 3. Securely fasten the fabricated component according to structural load requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tools for cutting or forming, leading to contamination and reduced corrosion resistance. | Employ dedicated stainless steel cutting blades and forming dies to prevent cross-contamination and maintain material integrity. |
| Inadequate edge preparation for welding, resulting in weak or porous welds. | Thoroughly clean and bevel edges before welding to ensure optimal weld penetration and strength. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heavy-duty drain covers and grates, Custom fabricated sink and countertop bases, Corrosion-resistant enclosures for janitorial equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||