Engineered for extreme durability, this 304 stainless steel stock sheet provides superior strength and corrosion resistance. Its robust construction makes it the ideal component for demanding pulling and lifting applications in corrosive or high-stress environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.273" |
| Length | 26" |
| Width | 14" |
Precision-manufactured to tight tolerances, this 0.273-inch thick stock sheet measures 26 inches in length and 14 inches in width. Constructed from high-grade 304 stainless steel, it offers exceptional tensile strength, yield strength, and a high degree of resistance to rust and corrosion, even in marine, chemical, or industrial settings. The material's inherent toughness ensures reliable performance under significant load and repeated stress, making it a critical component for custom fabrication of pulling assemblies, lifting fixtures, and structural supports where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the intended mounting surface is clean, dry, and free of debris. 2. Accurately mark and drill mounting holes according to design specifications, utilizing appropriate drill bits for stainless steel. 3. Secure the stock sheet using high-strength, corrosion-resistant fasteners (e.g., stainless steel bolts and locking nuts) tightened to the specified torque.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners, leading to galvanic corrosion and premature failure. | Always use 304 or 316 stainless steel fasteners that are rated for the load and environment. |
| Improperly drilling holes without adequate lubrication or cooling, risking work hardening of the stainless steel. | Utilize a high-quality cutting fluid specifically designed for stainless steel and employ a slow, steady drilling speed with adequate pressure. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom winch and hoist component fabrication, Reinforcement plates for heavy-duty lifting slings, Structural backing for marine-grade pulling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||