This robust 304 stainless steel stock sheet offers superior corrosion resistance and hygienic properties, ideal for demanding plumbing and janitorial environments requiring durability and sanitation.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.152" |
| Length | 44" |
| Width | 23" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet boasts a nominal thickness of 0.152 inches, a length of 44 inches, and a width of 23 inches. Its 304 (18-8) alloy composition provides excellent resistance to a wide range of corrosive media and atmospheric conditions, making it highly suitable for environments where hygiene and chemical inertness are paramount. The material's inherent strength and durability ensure long-term performance in high-traffic and demanding service areas.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation surface is clean, dry, and free of debris. 2. Carefully position the stainless steel sheet, aligning it with the desired application. 3. Secure the sheet using appropriate fastening methods (e.g., screws, rivets, adhesives) suitable for the substrate and expected load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fasteners that can corrode and stain the stainless steel. | Always use stainless steel fasteners of a compatible grade (e.g., 304 or 316) to prevent galvanic corrosion and staining. |
| Allowing abrasive materials or cleaning agents to scratch or damage the surface. | Employ non-abrasive cleaning tools and mild detergents. Always clean in the direction of the metal grain, if visible. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Countertops and work surfaces in commercial kitchens and laboratories, Splashbacks and wall protection in high-moisture or high-impact areas, Custom fabrication for shelving, partitions, and equipment housing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||