Engineered for demanding industrial environments, this 304 stainless steel stock sheet offers exceptional corrosion resistance and structural integrity for critical pressure and temperature control systems.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.050" |
| Length | 36" |
| Width | 44" |
A proven choice for industrial professionals, this 0.050-inch thick, 36-inch by 44-inch sheet of 304 stainless steel provides superior performance in applications requiring resistance to high pressures and fluctuating temperatures. Its austenitic structure ensures excellent ductility and weldability, making it ideal for fabrication of custom components, pressure vessels, heat exchangers, and control system housings. The inherent passivation layer of 304 stainless steel offers robust protection against a wide range of corrosive media, ensuring longevity and operational reliability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate metalworking tools. 3. Weld or fasten according to specified engineering drawings and industry standards for pressure containment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong thickness for the pressure rating. | Always consult pressure vessel codes and engineering calculations to determine the minimum required thickness for the intended application. |
| Inadequate edge preparation before welding. | Properly bevel and clean all edges to ensure full penetration and a strong, defect-free weld. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, Industrial control system enclosures, High-temperature ducting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||