This 304 stainless steel stock sheet is engineered for exceptional performance in rigorous heating and cooling environments. Its robust construction ensures longevity and reliability under extreme conditions.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.936" |
| Length | 12" |
| Width | 33" |
Purpose-built for heavy-duty applications, this 304 stainless steel stock sheet offers superior corrosion resistance, high-temperature strength, and excellent formability. Measuring 0.936 inches in thickness, 12 inches in width, and 33 inches in length, it is ideal for fabrication of heat exchangers, furnace components, ductwork, and other critical parts within industrial heating and cooling systems. The austenitic microstructure of 304 stainless steel guarantees consistent performance and minimal material degradation in oxidizing and reducing environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and forming equipment is calibrated for the specified material thickness. 2. Fabricate components according to design specifications, paying attention to edge preparation for welding. 3. Weld using appropriate TIG or MIG procedures with 308L filler material to maintain corrosion resistance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel welding rods which will lead to rust at the weld joints. | Always utilize 308L stainless steel filler material for TIG or MIG welding to ensure weld integrity and corrosion resistance. |
| Improper handling leading to surface scratches which can compromise aesthetic and functional integrity. | Handle sheets with care, using gloves and protecting the surface with appropriate film or padding during cutting, forming, and installation. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, Industrial Furnace Components, High-Temperature Ductwork.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||