This 304 stainless steel stock sheet provides superior corrosion resistance and formability. Its robust 0.142" thickness, combined with 32" length and 16" width, makes it ideal for demanding fabrication and repair projects in diverse environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.142" |
| Length | 32" |
| Width | 16" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet offers a nominal thickness of 0.142 inches (approximately 3.6 mm), a precise length of 32 inches (approximately 813 mm), and a width of 16 inches (approximately 406 mm). Composed of an austenitic chromium-nickel alloy, it exhibits excellent resistance to general corrosion, pitting, and crevice corrosion, particularly in mildly corrosive atmospheres. Its non-magnetic nature and good weldability further enhance its utility in applications requiring hygienic surfaces, food-grade compliance, or structural integrity under moderate stress. Material certification available upon request.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of contaminants. 2. Accurately measure and mark cut lines on the sheet according to project specifications. 3. Utilize appropriate cutting tools (e.g., shear, plasma cutter, or laser cutter) suitable for 0.142" stainless steel, ensuring proper safety precautions. 4. Finish cut edges with deburring tools to remove sharp edges and prepare for subsequent fabrication steps.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tools that can contaminate the stainless steel surface, leading to rust. | Always use dedicated stainless steel cutting and fabrication tools to prevent cross-contamination and maintain the material's corrosion resistance. |
| Insufficient support during cutting, leading to deformation or uneven cuts. | Ensure adequate support for the sheet during cutting operations to maintain flatness and achieve precise dimensions. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication and chassis building, Food processing equipment components, Marine hardware and fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||