This 304 stainless steel stock sheet is designed for robust performance in high-temperature and corrosive environments. Its superior material properties ensure longevity and efficiency in critical heating and cooling systems.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.405" |
| Length | 42" |
| Width | 19" |
Engineered for reliability and performance, this 0.405-inch thick stock sheet offers exceptional corrosion resistance, high tensile strength, and excellent formability, characteristic of Grade 304 stainless steel. Measuring 42 inches in length and 19 inches in width, it is precisely manufactured to meet stringent industry standards for HVAC components, heat exchangers, ductwork, and thermal management systems. Its non-magnetic nature and ability to withstand extreme temperature fluctuations make it a preferred material for demanding industrial and commercial applications requiring sustained operational integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all surfaces are clean and free of contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate tooling for stainless steel. 3. Securely fasten the sheet using compatible welding, bolting, or riveting techniques, ensuring proper sealing if required.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can cause galling or contamination. | Utilize specialized stainless steel cutting blades and lubricants to prevent contamination and ensure clean cuts. |
| Inadequate surface preparation leading to poor weld adhesion or premature corrosion. | Thoroughly degrease and mechanically clean all mating surfaces before any joining or installation process. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, HVAC Ductwork Systems, Industrial Oven Linings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||