This premium 304 stainless steel stock sheet is engineered for critical pressure and temperature control systems. Its substantial thickness and robust material composition ensure exceptional performance and longevity in demanding industrial environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.541" |
| Length | 18" |
| Width | 31" |
Purpose-built for heavy-duty applications, this 304 stainless steel stock sheet provides superior performance in environments requiring high integrity for pressure and temperature control. With a precise thickness of 0.541 inches and dimensions of 18 inches by 31 inches, it offers ample material for fabricating complex components. 304 stainless steel, renowned for its excellent corrosion resistance, particularly against chlorides and general atmospheric conditions, makes this sheet ideal for chemical processing, food and beverage, and high-purity fluid handling systems where contamination and degradation are critical concerns. Its inherent strength and stability under varying thermal loads ensure reliable system operation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with process media and operating conditions. 2. Precisely cut the sheet to required dimensions using appropriate industrial cutting tools. 3. Fabricate and install using certified welding and joining procedures for stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners with 304 stainless steel components in corrosive environments. | Always utilize 304 or 316 stainless steel fasteners to prevent galvanic corrosion and ensure long-term joint integrity. |
| Improper cleaning leading to surface contamination and reduced corrosion resistance. | Thoroughly clean the sheet with non-abrasive materials and appropriate degreasers before and after fabrication to maintain surface passivation. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, High-temperature heat exchanger components, Corrosive fluid containment and piping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||